Die Sinker EDM

S325

PNC S325 are traditional type of sinker edm machines. The X and Y axis are operating manually with the hand wheel around the work table. The oil tank of this model is designed underneath of the machine body, where allows it to fit into facilities with limited floor space and working areas. The work table is 650 x 350mm, suitable for working on small workpiece and mould, such as: electrical components, mobile phones housing and etc.

Specifications
Function

Specification

	Unit	Specifications
Work Tank (LxWxH)	mm	860 x 530 x 350
Work Table (LxW)	mm	650 x 350
Table travel (X)	mm	300
Table travel (Y)	mm	250
Servo travel (Z)	mm	150
Servo Travel (Z2)	mm	200
Distance Between Spindle to Work Table	mm	160-510
Max. Electrode Weight	kgs	120
Max. Workpiece Weight	kgs	550
Dimensions	mm	2700
Dimensions	mm	2300
Dimensions	mm	2100
Weight	kgs	1150

	Unit	Specifications
Work Tank (LxWxH)	inch	34 x 21 x 14
Work Table (LxW)	inch	26 x 14
Table travel (X)	inch	12
Table travel (Y)	inch	10
Servo travel (Z)	inch	6
Servo Travel (Z2)	inch	8
Distance Between Spindle to Work Table	inch	6-20
Max. Electrode Weight	lb	264
Max. Workpiece Weight	lb	1212
Dimensions	inch	106
Dimensions	inch	91
Dimensions	inch	83
Weight	lb	2536

Generator

Power Supply Unit	Unit	60A	90A	120A
Max. Power Unit	KVA	4.5	8	12
Max. Machining Speed	mm3/min	430	700	900
Min. Electrode Wear Ratio	%	0.1	0.1	0.1
Best Surface Roughness	μm/Ra	0.2	0.2	0.2
Outside Dimensions	mm	820 x 620 x 1700	820 x 620 x 1700	820 x 620 x 1700
Weight	kgs	320	350	380

Dielectric

Dielectric Unit	Unit	Specifications
Capacity	L	350
Pump Power	HP
Weight	kgs	Built-in
Dimensions	mm	Built-in

Standard Accessories

Auto Fire Extinguisher
Halogen Work Lamp
Clamping Plate
Leveling Pad
Flushing Nozzle
Patented Electrode Holder
Paper Filter
Drill Chuck
Tool Box
Remote Controller
Signal Tower Light

Optional Accessories

Dielectric Cooler
Permanent Magnetic Table
EZ-SPARK for Super Hard Workpiece

Back to list